View EMC1043-1-ACZL-TR_8550493.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

smsc emc1043 datasheet revision 1.44 (04-14-08) datasheet product features emc1043 1c triple temperature sensor with beta compensation and hotter of two zones general description the emc1043 is a family of system management bus (smbus) temperature sensors that monitors three temperature zones, one internal diode and two externally connected diodes, for pc and embedded environments. the emc1043 includes beta compensation circuitry to correct for variation in the beta of measurement transistors. other extended features include resistance error correction and ideality factor configuration to eliminate major sources of temperature measurement error. 1 an added feature to the emc1043 is a function that automatically compares the two external temperature zones and reports the hotter of the two temperatures. selectable conversion rates and standby mode support low-power operation. the temperature measurement ranges support two data rang es (and formats), -64c to +127c and -64c to +191c. applications ? desktop and notebook computers ? hardware management ? servers ? embedded applications features ? supports two external temperature diodes 1 c accuracy (40 c to 80 c) 0.125 c resolution ideality factor configuration accepts 2200pf cap across external diodes for noise suppression optional resistive error corr ection on external diode 2 resistance error correction (up to 100 ohms) beta compensation ? internal temperature diode 3 c accuracy (0 c to 85 c) 0.125 c resolution ? low power operation 4ua standby current ? 3.0v to 3.6v supply ? programmable conversion rate ? smbus 2.0 compliant four smbus address available ? reports hotter of two diodes with dual-core cpu simplified block diagram 1.patents pending local temp diode switching current smclk internal diode register configuration register status register smbus interface external diode 1 register external diode 2 register smdata 11-bit delta-sigma adc analog mux and anti-alias filter dp1 dn1 dp2 dn2 digital mux and byte interlock downloaded from: http:///
reel size is 4,000 pieces. evaluation boards available upon request. (evb-emc1043, evb-emc1043c) ordering number package features smbus address EMC1043-1-ACZL-TR 8 pinmsop package (lead free rohs compliant) two external diodes with rec and beta compensation and hottest of comparision 1001_100x emc1043-2-aczl-tr 1001_101x emc1043-3-aczl-tr 1001_000x emc1043-4-aczl-tr 1001_001x emc1043-5-aczl-tr two external diodes with rec. beta compensation on external diode 1 only. hottest of comparision 1001_100x 1c triple temperature sensor with beta compensation and hotter of two zones datasheet revision 1.44 (04-14-08) 2 smsc emc1043 datasheet 80 arkay drive, hauppauge, ny 11788 (631) 435-6000, fax (631) 273-3123 copyright ? 2008 smsc or its subsidiaries. all rights reserved. circuit diagrams and other information relating to smsc products are includ ed as a means of illustrating typical applications. consequently, complete information sufficient for construction purposes is not necessarily given. although the information has been checked and is bel ieved to be accurate, no re sponsibility is assumed for inaccuracies. smsc reserves the right to make changes to specifications and product descriptions at any time without notice . contact your local sm sc sales office to obtain the latest specifications before placing your product order. the provision of this information does not convey t o the purchaser of the described semicond uctor devices any licenses under any patent rights or other intellectual property rights of smsc or others. all sale s are expressly conditional on your agreement to the te rms and conditions of the most recently dated version of smsc's standard terms of sale agreement dated before the date of your order (the "terms of sale agreement"). the pro duct may contain design defects or errors known as anomalies which may cause the product's functions to deviate from pu blished specifications. anomaly sheets are availab le upon request. smsc products are not designed, intended, authorized or warranted for use in any life support or other application wh ere product failure could cause or contribute to personal injury or severe property damage. any and all such uses without prior written approval of an officer of smsc and further testing and/or modification will be fully at the risk of the customer. copies of this document or other smsc literature, as well as the terms of sale agreement, may be obtained by visiting sm scs website at h ttp://www.smsc.com. smsc is a registered trademark of standard microsystems corporat ion (smsc). product names and company names are the trademarks of their respective holders. smsc disclaims and excludes any and all warranties, including without limitation any and all implied warranties of merchantabil ity, fitness for a particular purpose, title, and against infringement and the like, and any and all warranties arising from any cou rse of dealing or usage of trade. in no event shall smsc be liable for any direct, incidental, indire ct, special, punitive, or cons equential damages; or for lost data, profits, savings or revenues of any kind; regardless of the form of action, whether based on contrac t; tort; negligence of smsc or others; strict liability; breach of w arranty; or otherwise; whether or not any remedy of buyer is h eld to have failed of its essential purpose, and whether or no t smsc has been advised of the possibility of such damages. ordering information downloaded from: http:///
1c triple temperature sensor with beta compensation and hotter of two zones datasheet smsc emc1043 3 revision 1.44 (04-14-08) datasheet table of contents chapter 1 pin function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 chapter 2 electrical specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 2.1 absolute maximum ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 2.2 electrical specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 2.3 system management bus interface protocol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 2.3.1 write byte . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 2.3.2 read byte . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 2.3.3 send byte . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 2.3.4 receive byte . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 2.3.5 smbus timing diagram. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 2.4 smbus addresses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 2.5 smbus timeout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 chapter 3 product description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 3.1 power modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 3.2 one shot during standby mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 3.3 operation during run mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 3.3.1 conversion rates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 3.3.2 dynamic averaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 3.4 temperature monitors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 3.5 temperature measurement results and data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 3.6 resistance error correction (rec) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 3.7 beta compensation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 3.8 programmable ideality factor. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 3.9 diode faults . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 chapter 4 register set and description. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 4.1 legacy temperature data registers ( 00h, 23h, 01h, 10h, f8h, f9h) . . . . . . . . . . . . . . . . . . . . . . 19 4.2 extended format temperature registers (fah-fdh) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 4.3 status register - 02h . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 4.4 configuration register (03h read, 09h wr ite) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 4.5 configuration 2 register - (04h) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 4.6 one shot register - (0fh) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 4.7 ideality configuration registers (27h - 28h) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 4.8 beta configuration registers (29h - 2ah). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 4.9 product id register (edh) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 4.10 manufacturer id register (feh) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 4.11 revision register (ffh) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 chapter 5 typical operating curves. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 chapter 6 package outline . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 6.1 package markings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 downloaded from: http:///
1c triple temperature sensor with beta compensation and hotter of two zones datasheet revision 1.44 (04-14-08) 4 smsc emc1043 datasheet list of figures figure 1.1 emc1043 pin diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 figure 2.1 system management bus timing diagr am . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 figure 3.1 emc1043 system drawing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 figure 3.2 block diagram of temperature monitoring circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 figure 3.3 external diode configurations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 figure 6.1 8-pin msop package outline - 3x3mm body 0.65mm pitch. . . . . . . . . . . . . . . . . . . . . . . . . 28 downloaded from: http:///
1c triple temperature sensor with beta compensation and hotter of two zones datasheet smsc emc1043 5 revision 1.44 (04-14-08) datasheet list of tables table 1.1 emc1043 pin description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 table 2.1 absolute maximum ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 table 2.2 electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 table 2.3 write byte protocol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 table 2.4 read byte protocol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 table 2.5 send byte protocol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 table 2.6 receive byte protocol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 table 3.1 supply current vs. conversion rate and adc aver aging factor . . . . . . . . . . . . . . . . . . . . . . 12 table 3.2 emc1043 temperature data format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 5 table 4.1 emc1043 register set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 table 4.2 status register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 table 4.3 configuration register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 table 4.4 conversion rate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 table 4.5 configuration 2 register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 table 4.6 one shot registers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 table 4.7 ideality configuration registers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 table 4.8 ideality factor look up table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 table 4.9 substrate diode ideality factor look-up table (bjt model) . . . . . . . . . . . . . . . . . . . . . . . . . 23 table 4.10 beta configuration registers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 table 4.11 beta configuration look up table. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 table 4.12 product id register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 table 4.13 manufacturer id register. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 table 4.14 revision register. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 table 6.1 8-pin msop package parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 downloaded from: http:///
1c triple temperature sensor with beta compensation and hotter of two zones datasheet revision 1.44 (04-14-08) 6 smsc emc1043 datasheet chapter 1 pin function figure 1.1 emc1043 pin diagram table 1.1 emc1043 pin description pin pin no. description dp1 1 external diode 1 positive (anode) connection dn1 2 external diode 1 negative (cathode) connection dp2 3 external diode 2 positive (anode) connection dn2 4 external diode 2 negative (cathode) connection gnd 5 ground vdd 6 supply voltage smdata 7 system management bus data - bi -directional data, open drain output smclk 8 system management bus clock input 8-msop 87 6 5 12 3 4 dp1 dn1 dp2 dn2 smclk smdata vdd gnd downloaded from: http:///
1c triple temperature sensor with beta compensation and hotter of two zones datasheet smsc emc1043 7 revision 1.44 (04-14-08) datasheet chapter 2 electrical specifications 2.1 absolute maximum ratings note: stresses above those listed could cause damage to the device. this is a stress rating only and functional operation of the device at any other condition above those indicated in the operation sections of this specification is not implied. when powering this device from laboratory or system power supplies, it is im portant that the absolute maximum ratings not be exceeded or device failure can result. some power supplies exhibit voltage spikes on their outputs when the ac power is switched on or off. in addition, voltage transients on the ac power line may appear on the dc output. if this possibility exists, it is suggested that a clamp circuit be used. 2.2 electrical specifications table 2.1 absolute maximum ratings description rating unit supply voltage v dd -0.3 to 5.0 v voltage on smdata and smclk pins -0.3 to 5.5 v voltage on any other pin -0.3 to vdd+0.3 v operating temperature range -40 to 125 c storage temperature range -55 to 150 c lead temperature range refer to jedec spec. j-std-020 package thermal charac teristics for msop-8 thermal resistance t ja (at 0 air flow) 135.9 c/w esd rating, all pins human body model 2000 v table 2.2 electrical characteristics v dd =3.0v to 3.6v, t a = -20 c to +85 c, typical values at t a = 27 c unless otherwise noted parameter symbol min typ max units conditions dc power supply voltage v dd 3.0 3.3 3.6 v average operating current i dd 340 400 a 4 conversions/s see table 4.4 . i stby 24 a standby mode internal temperature monitor temperature accuracy 1 3 c- 2 0 c t a 85 c 1.5 c0 c < t a 85 c temperature resolution 0.125 c downloaded from: http:///
1c triple temperature sensor with beta compensation and hotter of two zones datasheet revision 1.44 (04-14-08) 8 smsc emc1043 datasheet external temperature monitor temperature accuracy remote diode 40 c to 80 c remote diode -20 c to 125 c remote diode -64 c to 192 c 1 3 5 c c c 15 c t a 70 c -20 c t a 85 c -20 c t a 85 c temperature resolution 0.125 c filter capacitor c filter 2.2 nf connected across external diode note 2.2 voltage tolerance voltage at pin ( smdata,smclk) v tol -0.3 5.5 v smbus interface (smdata,smclk) input high level v ih 2.0 v input low level v il 0.8 v input high/low current i ih /i il -1 1 a hysteresis 500 mv input capacitance 5 pf output low sink current 6 ma smdata = 0.6v smbus timing clock frequency f smb 10 400 khz spike suppression 50 ns bus free time start to stop t buf 1.3 s hold time start t hd:sta 0.6 s setup time start t su:sta 0.6 s setup time stop t su:sto 0.6 s data hold time t hd:dat 0.3 s data setup time t su:dat 100 ns clock low period t low 1.3 s clock high period t high 0.6 s clock/data fall time t f * 300 ns *min = 20+0.1c b ns clock/data rise time t r * 300 note 2.1 ns *min = 20+0.1c b ns capacitive load (each bus line) c b 0.6 400 pf table 2.2 electrical char acteristics (continued) v dd =3.0v to 3.6v, t a = -20 c to +85 c, typical values at t a = 27 c unless otherwise noted parameter symbol min typ max units conditions downloaded from: http:///
1c triple temperature sensor with beta compensation and hotter of two zones datasheet smsc emc1043 9 revision 1.44 (04-14-08) datasheet note 2.1 300ns rise time max is required for 400khz bus operation. for lower clock frequencies, the maximum rise time is (0.1/f smb )+50ns note 2.2 see smsc applications for application notes and guidelines when measuring gpu processor diodes and cpu processor diodes. 2.3 system management bus interface protocol a host controller, such as an smsc i/o controlle r, communicates with the emc1043 via the two wire serial interface named smbus. th e smbus interface is used to read and write registers in the emc1043, which is a slave-only device. a detailed timing diagram is shown in figure 2.1 . figure 2.1 system management bus timing diagram the emc1043 implements a subset of the smbus s pecification and supports write byte, read byte, send byte, and receive byte protocols as shown. in the tables that describe the protocol, the gray columns indicate that the slave is driving the bus. all of the below protocols use the following convention: 2.3.1 write byte the write byte is used to write one byte of data to the registers as shown in ta b l e 2 . 3 . 2.3.2 read byte the read byte protocol is used to read one byte of data from the registers as shown in table 2.4 . data sent to device data sent to the host # of bits sent # of bits sent table 2.3 write byte protocol start slave address wr ack command ack data ack stop 171 18 18 11 table 2.4 read byte protocol start slave address wr ack command ack start slave address rd ack data nack stop smdata smclk t low t r t high t f t buf t hd:sta p s s - start condition p - stop condition t hd:dat t su:dat t su:sta t hd:sta p t su:sto s downloaded from: http:///
1c triple temperature sensor with beta compensation and hotter of two zones datasheet revision 1.44 (04-14-08) 10 smsc emc1043 datasheet 2.3.3 send byte the send byte protocol is used to set the internal address register to the correct address as shown in table 2.5 . the send byte can be followed by the receive byte protocol described in table 2.6 to read data from the register. the send byte protocol ca nnot be used to write data - if data is to be written to a register then the write byte protocol must be used as described in section 2.3.1 . 2.3.4 receive byte the receive byte protocol is used to read data from a register when the internal register address pointer is known to be at the right location (e.g. se t via send byte). this can be used for consecutive reads of the same register as shown in table 2.6 . 2.3.5 smbus timing diagram the timing for the smbus is shown in figure 2.1 . 2.4 smbus addresses the emc1043 may be ordered with one of four slave addresses as shown in ordering information . attempting to communicate with t he emc1043 smbus interface with an invalid slave address or invalid protocol results in no response from the device and does not affect its register contents. the emc1043 supports stretching of the smclk signal by ot her devices on the smbus but will not perform this operation itself. 2.5 smbus timeout the emc1043 includes an smbus time -out feature. following a 25 ms period of inactivity on the smbus, the device will time-out and reset the smbus interface. 171 18 11 7 1 1 811 table 2.5 send byte protocol start slave addr wr ack reg. addr ack stop 171 18 11 table 2.6 receive byte protocol start slave addr rd ack reg. data nack stop 171 1 81 1 table 2.4 read byte protocol downloaded from: http:///
1c triple temperature sensor with beta compensation and hotter of two zones datasheet smsc emc1043 11 revision 1.44 (04-14-08) datasheet chapter 3 product description the emc1043 is an smbus sensor that monitors three temperature zones for use in a personal computer or embedded environment. the part may be used as a companion to one of smscs broad line of sio host devices to perform fan control and thermal management. the emc1043-1, emc1043-2, emc1043-3 and emc1043-4 are designed specifically to work with a cpu that implements the thermal diode as a pnp su bstrate transistor with the collector connected to gnd. a new feature called beta compensation automatically compensates for measurement error caused by beta variation in cpu thermal diodes as described in section 3.7 . because the beta compensation circuit is designed to work with pnp substrate transistors, the emc1043-1, emc1043-2, emc1043- 3 and emc1043-4 are not typica lly used with diode-connected transistors (such as the 2n3904) or cpus that implement the thermal diode as a two-terminal diode (such as the amd processor). however, the beta co mpensation feature may be disabled by configuring the appropriate register as described in section 4.8 . for applications that measure a two-terminal thermal diode, refer to the emc1063. a typical system is shown in figure 3.1 3.1 power modes the emc1043 has two power modes. ? run mode - in this mode, the te mperature monitors are active and converting at the programmed conversion rate. the average power dissipation will depend on the conversion rate. when the emc1043 is not actively converting a channel, it goes into a lower power wait state. ? standby mode (power-up default) - in this mode, t he emc1043 is put into a low power state. in the standby mode, temperature monitoring is disabled. the device will still respond to smbus commands. 3.2 one shot du ring standby mode the emc1043 supports a one-shot command when it is in standby mode. writing to the one-shot register will cause the device to power up, perform 1 full set of temperature conversions, then return to standby mode. figure 3.1 emc1043 system drawing cpu thermal diode emc1043 host smbus interface dp1 dn1 smbus internal diode dp2 dn2 remote diode-connected transistor downloaded from: http:///
1c triple temperature sensor with beta compensation and hotter of two zones datasheet revision 1.44 (04-14-08) 12 smsc emc1043 datasheet 3.3 operation during run mode when the device is active, there are two modes of operation available. ? normal mode (power-up default) - in this mode of operation, the emc1043 continuously samples and updates all of its temperature channels. ? hotter of two mode - in this mode, the emc1043 cont inuously samples and then compares the two remote zones. the hotter of the two remote zones is loaded into the external diode 2 data registers. in addition, t he hotter bit in the status register is set or cleared to indicate which external diode zone is hotter. if the two remote zones are exactly equal to each other, then the hotter bit is cleared (set to 0), and the results of the two remote zones are stored in their respective registers. 3.3.1 conversion rates the emc1043 may be configured for different c onversion rates based on the system requirements. the available rates are 1 full set of conversions per second to 16 full sets of conversions per second. the conversion rate is configured as described in section 4.4 . the available conversion rates are shown in ta b l e 4 . 4 . 3.3.2 dynamic averaging the emc1043 temperature channels support a new f eature that measures the external diode channels for an extended time based on the selected conversi on rate. this functionality can be disabled as described in section 4.5 for increased power savings at the lower conversion rates. when dynamic averaging is enabled, the device wi ll automatically adjust the sampli ng and measurement time for both external diode channels. this allows the device to average 2x or 4x longer than the normal 11 b it operation while still maintaining the selected conversion rate. the benefits of dynamic averaging are improved noise rejection due to the longer integrat ion time as well as less random variation on the temperature me asurement. the dynamic averaging applies when a one-shot command is issued. the device will perform the desired averaging during the one-shot operation according to the selected conversion rate. the dynamic averaging will affect the average supply current based on the chosen conversion rate as shown in table 3.1 . table 3.1 supply current vs. conver sion rate and adc averaging factor conversion rate adc averaging factor 4x (max_res = 1) (da_n = 0) 2x (max_res = 0) (da_n = 0) 1x (da_n = 1) 1 / sec 190ua 132ua 105ua 2 / sec 315ua 205ua 150ua 4 / sec 580ua 350ua 235ua 8 / sec n/a 640ua 405ua 16 / sec n/a n/a 750ua downloaded from: http:///
1c triple temperature sensor with beta compensation and hotter of two zones datasheet smsc emc1043 13 revision 1.44 (04-14-08) datasheet 3.4 temperature monitors in general, thermal diode temperat ure measurements are based on the change in forward bias voltage of a diode when operated at two different currents. this v be is then proportional to absolute temperature as shown in the following equation: figure 3.2 shows a block diagram of t he temperature measurement circuit. the negative terminal for the remote temperature diode, dn, is interna lly biased with a forward diode voltage referenced to ground. the emc1043-1, emc1043-2, em c1043-3 and emc1043-4 are designed to work with the pnp substrate transistor in a cpu. the external diode 2 channel in the emc1043-5 has beta compensation disabled by default. the external diodes in all versions of the emc1 043 are compatible with a broad range of thermal diodes that may be connected as shown in figure 3.3 (see section 4.8 for programming details when using diode-connected transistors as the external diodes). where: k = boltzmanns constant t = absolute temperature in kelvin [1] q = electron charge = diode ideality factor figure 3.2 block diagram of te mperature monitoring circuit ? ? ? ? ? ? ? ? = ? = low high low be high be be i i q kt v v v ln _ _ dp dn anti- aliasing filter ? adc resistance error correction substrate pnp i low i high downloaded from: http:///
1c triple temperature sensor with beta compensation and hotter of two zones datasheet revision 1.44 (04-14-08) 14 smsc emc1043 datasheet 3.5 temperature measur ement results and data each temperature result for each zone is available in two byte wide data registers. as shown in section 4.1 , the 11-bit format has the 8 most significant bits stored in the high byte register and the 3 least significant bits stored in the three msb positions of the low byte register. the delta-sigma adc may be operated with more than 11 bits of resolution for improved averaging as described in section 4.5 , but the temperature result is reported at 11-bit resolution. the temperature results for the two remote zones are also stored in extended format with a range from -64c to +191c. the data format is a 2s comp lement number offset by 64c as shown in section 4.2 . the data for each of the remote zones in both legacy and extended format is stored in separate data registers so that both data formats are always available. ta b l e 3 . 2 shows the default and extended range formats. figure 3.3 external diode configurations local ground t od p typical remote substrate transistor i.e. cpu substrate pnp typical remote discrete npn transistor i.e. 2n3904 t od n t od p t od n typical remote discrete pnp transistor i.e. 2n3906 t od p t od n downloaded from: http:///
1c triple temperature sensor with beta compensation and hotter of two zones datasheet smsc emc1043 15 revision 1.44 (04-14-08) datasheet 3.6 resistance e rror correction (rec) resistance error correction is an au tomatic feature that eliminat es the need to characterize and compensate for series resistance in the external diode lines. the emc1043 corrects for as much as 100 ohms of series resistance. when using a temperature sensor t hat does not include resistance error correction, voltage developed across the parasitic resistance in the external diode path produces an error in the reported temperature. the error introduced by this resistance is approximately +0.7c per ohm. sources of series resistance are pcb trace resistance, on die (i.e. on the processor) metal resistance, bulk resistance in the base and emitter of the temperature transistor. when monitoring the thermal diode of an amd k8 processor, the resistance error correction must be disabled for accurate temperature measurements. th is is accomplished by clearing the rec bit in the configuration 2 register (see section 4.5 ). please see application note 13.16 - using the emc1043 with amd processors for more details. 3.7 beta compensation the beta compensation function automatically elimin ates temperature errors caused by beta variation in modern, low beta transistors used for monitoring processor temperatures. changes in beta as differing currents are applied to temperature transistors can cause significant temperature errors in monitoring devices. as modern processor geometries shrink the trend is for transistor betas to decrease, which exacerba tes temperature errors. table 3.2 emc1043 temperature data format temperature (c) range -64c to 127c range -64c to 191c binary offset binary diode fault 100 0000 0000 100 0000 0000 <= -64 110 0000 0000 100 0000 0000 -63.875 110 0000 0001 100 0000 0001 -63 110 0000 1000 100 0000 1000 -1 111 1111 1000 101 1111 1000 0 000 0000 0000 110 0000 0000 0.125 000 0000 0001 110 0000 0001 1 000 0000 1000 110 0000 1000 64 010 0000 0000 000 0000 0000 65 010 0000 1000 000 0000 1000 127 011 1111 1000 001 1111 1000 127.875 011 1111 1111 001 1111 1111 128 011 1111 1111 010 0000 0000 191 011 1111 1111 011 1111 1000 >= 191.875 011 1111 1111 011 1111 1111 downloaded from: http:///
1c triple temperature sensor with beta compensation and hotter of two zones datasheet revision 1.44 (04-14-08) 16 smsc emc1043 datasheet discrete transistors, with collector connected to base to form a diode, are generally immune to these temperature errors because of hi gh (>100) betas. a beta variation of 10% from low current to high current, when beta equals 100, induces approximat ely 0.12 error at 100c. however for a low beta (1.0) substrate transistor used for processor tem perature measurement, a be ta variation of 10% from low to high current induces approximately 6.12 error at 100c. because the beta compensation function is desi gned to be used with substrate pnp transistors only, this function should be disabled when using a diode-connected transistor (such as the 2n3904) or cpus that implement the thermal diode as a two-term inal device. the beta compensation function is disabled by writing 07h to t he beta configuration register when measuring an amd k8 processor, the beta compensation circuitry must be disabled. see section 4.8 . please see smsc application note 13.16 - using the emc1043 with amd processors for more details. 3.8 programmable ideality factor the emc1043 default is for a diode ideality factor of 1.008 which is common for a 2n3904 diode and for many processor transistors. when a diode or trans istor is used that has a different ideality factor value than 1.008 a temperature error is induced that is a linear function of temperature. previous solutions for this mismatch in ideality factor has been to supply a programmable offset to the temperature reading which corrects the error at a si ngle temperature but causes a residual error at all other temperatures. the emc1043 ideality factor register corrects this mismatch error at all temperatures (see section 4.7 ). application note: when monitoring a substrate transistor or cpu diode and beta compensation is enabled, the ideality factor should not be adjusted. beta compensation automatically corrects for most ideality errors. 3.9 diode faults the emc1043 detects a fault if the dp pin is left float ing or is shorted to vdd. in the case of a diode fault, the corresponding status bit will be set and the output data will be set at 400h. downloaded from: http:///
smsc emc1043 17 revision 1.44 (04-14-08) datasheet 1c triple temperature sensor with beta compensation and hotter of two zones datasheet chapter 4 register set and description the following registers are accessi ble through the smbus interface. table 4.1 emc1043 register set register address r/w register name symbol b7 b6 b5 b4 b3 b2 b1 b0 default value read write 00h n/a r internal temperature high byte - legacy format inthbl sign 64 32 16 8 4 2 1 00h 23h n/a r internal temperature low byte - legacy format intlbl 0.5 0.25 0.125 00h 01h n/a r external diode 1 high byte - legacy format et1hbl sign 64 32 16 8 4 2 1 00h 10h n/a r external diode 1 low byte - legacy format et1lbl 0.5 0.25 0.125 00h f8h n/a r external diode 2 high byte - legacy format et2hbl sign 64 32 16 8 4 2 1 00h f9h n/a r external diode 2 low byte - legacy format et2lbl 0.5 0.25 0.125 00h fah n/a r external diode 1 high byte - extended format et1hbe 128 64 32 16 8 4 2 1 00h fbh n/a r external diode 1 low byte - extended format et1lbe 0.5 0.25 0.125 00h fch n/a r external diode 2 high byte - extended format et2hbe 128 64 32 16 8 4 2 1 00h downloaded from: http:///
1c triple temperature sensor with beta compensation and hotter of two zones datasheet revision 1.44 (04-14-08) 18 smsc emc1043 datasheet fdh n/a r external diode 2 low byte - extended format et2lbe 0.5 0.25 0.125 00h status and control 02h n/a r status sts busy - - hott er - - d2 d1 00h 03h 09h r/w configuration cfg - adc_st op - - - cr<2:0> 45h 04h 04h r/w configuration 2 cfg2 - - - - max_ res da_n comp rec 09h one shot n/a 0fh w one shot conversion shot the data written to this register is irrelevant and will not be stored 00h ideality 27h 27h r/w external diode 1 ideality correction factor idcf1 - - b5 b4 b3 b2 b1 b0 12h (1.008) 28h 28h r/w external diode 2 ideality correction factor idcf2 - - b5 b4 b3 b2 b1 b0 12h (1.008) 29h 29h r/w external diode 1 beta configuration bcf1 - - - - - beta<2:0> 03h table 4.1 emc1043 regi ster set (continued) register address r/w register name symbol b7 b6 b5 b4 b3 b2 b1 b0 default value read write downloaded from: http:///
smsc emc1043 19 revision 1.44 (04-14-08) datasheet 1c triple temperature sensor with beta compensation and hotter of two zones datasheet during power on reset (por), the default values are stored in t he registers. a por is initiated when power is first applied to the part and the voltage on the vdd supply surpasses the por level as specified in the el ectrical characteristics. any reads to undefined registers will return 00h. writes to undefined registers will not have an effect. the emc1043 uses an interlock mechanism that will update the low byte of a particular monitor when the high byte is read. this prevents changes in register content when the adc updates between successive reads. 4.1 legacy temperature data regi sters (00h, 23h, 01h , 10h, f8h, f9h) as shown in table 4.1 , each temperature monitor has two data regist ers. the 11 bit temperature data is stor ed aligned to the left resulting in the h igh byte containing temperature in 1c steps and the low byte containing fractions of a degree. 4.2 extended format temper ature registers (fah-fdh) the extended format temperature registers store only the external diode temperatures in the extended data format. this is becau se, due to the operating range limitations of the emc1043, the internal temperat ure could not benefit from the extended temperature range. lik e the legacy data formatting, the data is stored in tw o registers per temperature channel. 2ah 2ah r/w external diode 2 beta configuration bcf2 - - - - - beta<2:0> 03h (07h for emc1043- 5) edh edh r product id pid 0 0 0 0 1 1 0 0 0ch (-1) 0 0 0 0 1 1 0 1 0dh (-2) 0 0 0 0 1 1 1 0 0eh (-3) 0 0 0 0 1 1 1 1 0fh (-4) 0 0 1 0 1 1 0 0 2ch (-5) feh feh r manufacturer id smsc 0 1 0 1 1 1 0 1 5dh ffh ffh r revision register rev - - - - 0 0 0 1 01h table 4.1 emc1043 register set (continued) register address r/w register name symbol b7 b6 b5 b4 b3 b2 b1 b0 default value read write downloaded from: http:///
1c triple temperature sensor with beta compensation and hotter of two zones datasheet revision 1.44 (04-14-08) 20 smsc emc1043 datasheet 4.3 status register - 02h the status register is a read only register and returns the operational status of the part. external diode faults are indicated by bits 1 and 0. if either bit is set to 1, then a diode fault has occurred. when a diode fault occurs, the d1 or d2 status bit is set, but otherwise the data remains unchanged. bit 7 - busy - indicates that the adc is currently converting a temperature. bit 4 - hotter - during hotter of two mode, this bit indicates which of the external diode channels is hotter. if this bit is 0, then external diode 1 is hotter or equal to external diode 2. if this bit is 1, then external diode 2 is hotter than external diode 1. during normal operation, this bit will always read a 0. bit 1 - d2 - indicates that a diode fault has occurred on external diode 2. bit 0 - d1 - indicates that a diode fault has occurred on external diode 1. 4.4 configuration regis ter (03h read, 09h write) the configuration register controls the basic f unctionality of the emc1043. the bits are described below: bit 6 - standby- controls the adc conv ersions and power modes of the part. ? '0' - the device is in the run operating mode. th e adc is converting at the user-programmed conversion rate. ? '1' - (default) the device is in the standby operating mode (see section 3.1 ). bit 2-0 - cr<2:0> - determines the conversion rate for the temperature monitoring per table 4.4 . table 4.2 status register addr register b7 b6 b5 b4 b3 b2 b1 b0 default 02h status busy - - hotter - - d2 d1 00h table 4.3 configuration register addr register b7 b6 b5 b4 b3 b2 b1 b0 default 03h read, 09h write config - standby - - - cr<2:0> 45h downloaded from: http:///
1c triple temperature sensor with beta compensation and hotter of two zones datasheet smsc emc1043 21 revision 1.44 (04-14-08) datasheet 4.5 configuration 2 register - (04h) the configuration 2 register controls the basic functionality of the emc1043 that is not compatible with the emc1023. bit 3 - max_res - controls the external diode co nversion time during dynamic averaging. although the dynamic averaging may be used to increase the adc resolution, only 11 bits of data are available in the temperature registers. ? 0 - the dynamic averaging will set the adc averaging factor at 1x when the conversion rate is set at 16 conversions per second and 2x at conversion rates lower than 16 per second. ? 1 (default) - the dynami c averaging will set the adc averaging factor at 1x when the conversion rate is set at 16 conversions per second, 2x at 8 conversions / second and 4x at conversion rates lower than 8 per second. bit 2 - da_n - controls the dynamic digital averaging circuitry. see section 3.3.2 . ? 0 (default) - dynamic averaging is enabled. depending on the selected conversion rate, the adc averaging factor is increased for the external diodes. ? 1 - dynamic averaging is disabled. the adc aver aging factor will remain fixed at 1x for all conversion rates and will allow increased pow er savings at the slower conversion rates. bit 1 - comp - configures the device to perform a comparison for the hotter of two mode (see section 3.3, "operation during run mode," on page 12 .) ? 0 (default) - the device is in normal mode ? 1 - the device is in hotter of two mode. in this mode, the two external diode channels are measured and compared against each other. the hotte r of the two channels has its data loaded into the external diode 2 data registers. the in ternal diode and external diode 1 data registers remain unaffected. table 4.4 conversion rate cr<2:0> conversions / second (conversion time) 21 0 0 0 0 reserved 0 0 1 reserved 0 1 0 reserved 0 1 1 1 conversion / sec 1 0 0 2 conversions / sec 1 0 1 4 conversions / sec (default) 1 1 0 8 conversions / sec 1 1 1 16 conversions / sec table 4.5 configuration 2 register a d d rr e g i s t e rb 7b 6b 5b 4 b 3 b 2b 1b 0d e f a u l t 04h cfg2 - - - - max_res da_n comp rec 09h downloaded from: http:///
1c triple temperature sensor with beta compensation and hotter of two zones datasheet revision 1.44 (04-14-08) 22 smsc emc1043 datasheet bit 0 - rec - controls the resistance error correction circuitry ? '0' - the resistance error correction circuitry is disabled. ? '1' (default) - the resistance erro r correction circuitry is active and will automatically correct for up to 100 ohms of series resistance in the diode lines for both external diode 1 and external diode 2 channels. 4.6 one shot register - (0fh) the one shot register is an address place holder for the one-shot command. writing to the address initiates the command. the data written is not impor tant and is not stored. reading from the one-shot registers will always return 00h. 4.7 ideality configuration registers (27h - 28h) the ideality configuration registers store the ideality correction factor that is applied to each external diode. the table below shows the ideality factor settings for the ideality configuration registers. shading indicates power-up default. all codes that are not listed are reserved and should not be used. beta compensation and resistance error correction automatically correct for most diode ideality errors, therefore it is not recommended that th ese settings be updated without consulting smsc. table 4.6 one shot registers addr register b7 b6 b5 b4 b3 b2 b1 b0 default 0fh one shot conversion writing to this register address in itiates the one-shot . the data is not important and is not stored 00h table 4.7 ideality configuration registers addr register b7 b6 b5 b4 b3 b2 b1 b0 default 27h diode 1 ideality correction factor - - b5 b4 b3 b2 b1 b0 12h (1.008) 28h diode 2 ideality correction factor - - b5 b4 b3 b2 b1 b0 12h (1.008) downloaded from: http:///
1c triple temperature sensor with beta compensation and hotter of two zones datasheet smsc emc1043 23 revision 1.44 (04-14-08) datasheet for cpu substrate transistors that require the bjt transistor model, the ideality factor behaves slightly differently than for discrete di ode-connected transistors. refer to ta b l e 4 . 9 when using a cpu substrate transistor. table 4.8 ideality factor look up table setting factor setting factor setti ng factor 001000 0.9951 011000 1.0159 101000 1.0377 001001 0.9964 011001 1.0173 101001 1.0391 001010 0.9976 011010 1.0186 101010 1.0404 001011 0.9989 011011 1.0199 101011 1.0418 001100 1.0002 011100 1.0213 101100 1.0432 001101 1.0015 011101 1.0226 101101 1.0446 001110 1.0028 011110 1.0240 101110 1.0460 001111 1.0041 011111 1.0253 101111 1.0475 010000 1.0054 100000 1.0267 110000 1.0489 010001 1.0067 100001 1.0280 110001 1.0503 010010 1.0080 100010 1.0294 010011 1.0093 100011 1.0308 010100 1.0106 100100 1.0321 010101 1.0119 100101 1.0335 010110 1.0133 100110 1.0349 010111 1.0146 100111 1.0363 table 4.9 substrate diode ideality factor look-up table (bjt model) setting factor setting factor setting factor 001000 0.9869 011000 1.0079 101000 1.0291 001001 0.9882 011001 1.0092 101001 1.0304 001010 0.9895 011010 1.0105 101010 1.0317 001011 0.9908 011011 1.0120 101011 1.0330 001100 0.9921 011100 1.0132 101100 1.0343 001101 0.9934 011101 1.0146 101101 1.0356 001110 0.9947 011110 1.0159 101110 1.0369 001111 0.9960 011111 1.0173 101111 1.0382 010000 0.9973 100000 1.0187 110000 1.0395 downloaded from: http:///
1c triple temperature sensor with beta compensation and hotter of two zones datasheet revision 1.44 (04-14-08) 24 smsc emc1043 datasheet application note: when measuring a 65nm intel cpus, the idealit y setting should be the default 12h. when measuring 45nm intel cpus, t he ideality setting should be 15h. 4.8 beta configuratio n registers (29h - 2ah) the beta configuration registers have a factory programmed power-on default based on the beta of the pnp substrate transistor that is being monitored as the external diode. the default value of the diode 2 beta configuration register of emc1043-5 is 07h (disabled). the beta compensation circuit is able to compensa te for beta variation within a given range. the beta configuration register is configur ed to the proper range to match the cpu to be monitored. the beta values should be set so that the minimum expe cted beta is not below the threshold indicated in table 4.11 . beta compensation is activated if the beta<2: 0> bits are set to any value other than 07h. when using diode-connected transistors (such as t he 2n3904) or cpus that implement the thermal diode as a two-terminal diode, the beta c onfiguration register should be set to 07h. 010001 0.9986 100001 1.0200 110001 1.0408 010010 1.0000 100010 1.0213 010011 1.0013 100011 1.0226 010100 1.0026 100100 1.0239 010101 1.0039 100101 1.0252 010110 1.0053 100110 1.0265 010111 1.0066 100111 1.0278 table 4.10 beta configuration registers addr register b7 b6 b5 b4 b3 b2 b1 b0 default 29h diode 1 beta configuration - - - - - beta<2:0> 03h 2ah diode 2 beta configuration - - - - - beta<2:0> 03h (07h for emc1043- 5) table 4.11 beta configuration look up table beta<2:0> minimum beta 21 0 00 0 0 . 1 1 00 1 0 . 1 8 01 0 0 . 2 5 table 4.9 substrate diode ideality factor look-up table (bjt model) (continued) setting factor setting factor setting factor downloaded from: http:///
1c triple temperature sensor with beta compensation and hotter of two zones datasheet smsc emc1043 25 revision 1.44 (04-14-08) datasheet 4.9 product id register (edh) the product id register holds the unique produc t id for identifying smsc emc products. see table 4.1 for a list of the product id number for each version of the emc1043. 4.10 manufacturer id register (feh) the manufacturer id register contains an 8 bit wo rd that identifies the manufacturer of the emc1043 (smsc = 5dh). 4.11 revision register (ffh) the revision register contains a 4 bit word that identifies the die revision. 0 1 1 0.33 (default) 10 0 0 . 4 3 10 1 1 . 0 0 11 0 2 . 3 3 1 1 1 disabled table 4.12 product id register addr register b7 b6 b5 b4 b3 b2 b1 b0 default e d hp i d 00x01 1xx0 c h ( - 1 ) 0dh (-2) 0eh (-3) 0fh (-4) 2ch (-5) table 4.13 manufacturer id register addr register b7 b6 b5 b4 b3 b2 b1 b0 default f e hs m s c 01 0111015 d h table 4.14 revision register addr register b7 b6 b5 b4 b3 b2 b1 b0 default f f hr e v - - - - 00010 1 h table 4.11 beta configuration look up table (continued) beta<2:0> minimum beta 21 0 downloaded from: http:///
1c triple temperature sensor with beta compensation and hotter of two zones datasheet revision 1.44 (04-14-08) 26 smsc emc1043 datasheet chapter 5 typical operating curves supply current vs. conversion rate (ta = 27c, vdd = 3.3v) 0 100 200 300 400 500 600 700 800 12 481 6 conversion rate (conv / sec) supply current (ua) temperature error vs. filter capacitor (2n3904, ta = 27c, t diode = 27c, vdd = 3.3v) -1.0 -0.8 -0.5 -0.3 0.0 0.3 0.5 0 1000 2000 3000 4000 filter capacitor (pf) temperature error (c) temperature error vs. ambient temperature (2n3904, t diode = 27c, vdd = 3.3v) -2.0 -1.5 -1.0 -0.5 0.0 0.5 1.0 1.5 2.0 0 1 53 04 56 07 59 0 ambient temperature (c) temperature error (c) temperature error vs. external diode temperature (2n3904, ta=42.5c, vdd = 3.3v) -2.0 -1.5 -1.0 -0.5 0.0 0.5 1.0 1.5 2.0 0 25 50 75 100 125 external diode temperature (c) temperature error (c) downloaded from: http:///
1c triple temperature sensor with beta compensation and hotter of two zones datasheet smsc emc1043 27 revision 1.44 (04-14-08) datasheet temperature error vs. leakage resistance (2n3904, ta = t diode = 27c, vdd = 3.3v) -40.0 -30.0 -20.0 -10.0 0.0 10.0 20.0 30.0 11 01 0 0 leakage resistance (m ) temperature error(c) dp to gnd dp to vdd standby current vs. supply voltage (ta = 27c) 0.0 0.5 1.0 1.5 2.0 2.5 3.0 2.9 3.1 3.3 3.5 3.7 supply voltage (v) standby current (ua) temperature error vs. series resistance 2n3904, ta = t diode = 27c, vdd = 3.3v 0.0 0.3 0.5 0.8 1.0 0 2 04 06 08 01 0 0 series resitance ( ) temperature error (c) rec active 0 15 30 45 60 75 temperature error (c) rec disabled rec active rec disabled temperature error vs. cpu temperature typical 65nm cpu from major vendor (ta = 27c, vdd = 3.3v, beta = 011, c filter = 0pf) -1 0 1 2 3 4 5 20 30 40 50 60 70 80 90 100 cpu temperature (c) temperature error (c) beta compensation enabled beta compensation disabled downloaded from: http:///
1c triple temperature sensor with beta compensation and hotter of two zones datasheet revision 1.44 (04-14-08) 28 smsc emc1043 datasheet chapter 6 package outline figure 6.1 8-pin msop package ou tline - 3x3mm body 0.65mm pitch table 6.1 8-pin msop package parameters notes: 1. controlling unit: millimeters. 2. tolerance on the true position of the leads is 0.065 mm maximum. 3. package body dimensions d and e1 do not includ e mold protrusion or flash. dimensions d and e1 to be determined at datum plane h. maximum mo ld protrusion or flash is 0.15mm (0.006 inches) per end, and 0.15mm (0.006 inches) per side. 4. dimension for foot length l measured at the gauge plane 0.25 mm ab ove the seating plane. 5. details of pin 1 identifier are optional but must be located within the zone indicated. min nominal max remarks a 0.80 ~ 1.10 overall package height a1 0.05 ~ 0.15 standoff a2 0.75 0.85 0.95 body thickness d 2.80 3.00 3.20 x body size e 4.65 4.90 5.15 y span e1 2.80 ~ 3.20 y body size h 0.08 ~ 0.23 lead foot thickness l 0.40 ~ 0.80 lead foot length l1 0.95 ref lead length e 0.65 bsc lead pitch 0 o ~8 o lead foot angle w 0.22 ~ 0.38 lead width ccc ~ ~ 0.10 coplanarity downloaded from: http:///
1c triple temperature sensor with beta compensation and hotter of two zones datasheet smsc emc1043 29 revision 1.44 (04-14-08) datasheet 6.1 package markings all devices will be marked on the first line of the top side with 1043. on the second line, they will be marked with the appropriate -x number (-1, -2, et c), the functional revision b and country code (cc) . downloaded from: http:///

▲Up To Search▲

Price & Availability of EMC1043-1-ACZL-TR

	To Download EMC1043-1-ACZL-TR Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .